Unit converter
Length converter
Instant conversion in your browser — length.
≈ 3.281 ft
Tip: enter the values one by one — 40 30 55 20 — and you get the total and the average.
1 m = 3.280839895 ft
Quick table Meters → Feet
| m | ft |
|---|---|
| 1 | 3.280839895 |
| 5 | 16.40419948 |
| 10 | 32.80839895 |
| 25 | 82.02099738 |
| 50 | 164.0419948 |
| 100 | 328.0839895 |
| 500 | 1,640.419948 |
| 1,000 | 3,280.839895 |
All unit families
- Weight / Massmg · g · kg · t · oz · lb · stThe kilogram is the base unit, and until 2019 it was the last one still defined by a physical object: a platinum-iridium cylinder kept near Paris. It is now defined through the Planck constant, so it can be reproduced in any properly equipped laboratory.
- Temperature°C · °F · KTemperature is the one family here that is not a multiplication. Celsius and Fahrenheit have different zero points as well as different step sizes, so you need the formula: °F = °C × 9/5 + 32.
- Volumeml · l · m³ · gal · pt · fl oz · cupThis is the family where the same word means two different amounts. American and British measures share their names but not their sizes, and a recipe that ignores the difference will not work.
- Aream² · km² · ha · ft² · acAreas are where a linear conversion quietly goes wrong. One metre is 3.28 feet, but one square metre is 10.76 square feet — the factor is squared. Converting the sides and forgetting the square is the single most common mistake in this family.
- Speedkm/h · mph · m/s · knFour units, four different worlds. Kilometres per hour on European roads, miles per hour in the US and UK, metres per second in physics and weather bulletins, knots at sea and in the air.
- Times · min · h · d · wk · mo · yrSeconds, minutes, hours, days and weeks convert exactly. Months and years do not, and no converter can make them.
- Digital storagebit · B · KB · MB · GB · TBDigital storage has two conflicting definitions of the same prefixes, and almost every confusion about file sizes comes from that.
1 meters (m) in every unit
| Millimeters | 1,000 mm |
| Centimeters | 100 cm |
| Kilometers | 0.001 km |
| Inches | 39.37007874 in |
| Feet | 3.280839895 ft |
| Yards | 1.093613298 yd |
| Miles | 0.0006213711922 mi |
About length units
Almost the whole world measures length in metres. The exceptions are narrow but stubborn: the United States uses feet and inches for everyday distances, and the United Kingdom still posts road signs in miles while selling timber in millimetres.
Some inches survive even in fully metric countries. Screen sizes, bike wheels, pipe threads and rim diameters are quoted in inches everywhere — those are industry conventions, not national ones.
Since 1959 the inch is defined as exactly 25.4 mm by international agreement. Conversions are therefore exact, not approximate: 1 ft = 0.3048 m to the last digit.
The field under the result divides a run into pieces: **12 metres of skirting over five walls is 2.4 metres each.** One warning that applies to every material sold by the metre — that figure is the optimistic one. Each cut takes a couple of millimetres with it, mitred corners need the length measured on the long face rather than the short one, and anything that joins wants an overlap. On five pieces the difference is small; on twenty it is a whole board.
About this conversion
Length conversion: 1 meters (m) equals 3.280839895 ft. As a practical reference, 1,000 m = 3,280.839895 ft — handy for construction, travel and screen sizes.
| m | ft |
|---|---|
| 1,000 | 3,280.839895 |
Frequently asked questions
Why is aircraft altitude always in feet?
Because aviation standardised on feet worldwide, including in metric countries. A "flight level 350" means 35,000 ft, roughly 10,668 m. Only a few airspaces (China, Russia, Mongolia) use metres.
Is a mile always 1,609 metres?
No, and this trips people up. The statute mile used on roads is 1,609.344 m. The nautical mile used at sea and in the air is 1,852 m — about 15% longer. If a figure comes from a boat, a plane or a weather bulletin, check which one it is.
How do I work with American plans and European materials?
Convert to millimetres, not to centimetres. Building and joinery drawings in Europe are dimensioned in millimetres precisely to avoid decimal points, and sheet goods come in mm thicknesses. A 3/4" board is 19.05 mm, which is why 18 mm plywood is the usual substitute.
Are these conversions exact or rounded?
Exact. Inch, foot, yard and mile all have legally defined values in metres (1 in = 25.4 mm exactly). Any rounding you see is only in how the result is displayed.